Shell and Tube He for Juice Heating

Head plates, shell, tube bundles, mounting flange and more make a Jiema Shell and Tube He for Juice Heating complete in order to perfect the heat transferring between two liquids. For one liquid medium, we guide it through the tubes that are connected with the head plates with several number of passes available in accord with different working conditions. For another, it makes its way into the shell and is uniformly distributed over the outer tube.

Regarding the technical requirements from our customers, our 2 Shell Pass Heat Exchanger then sets a few baffles in a bid to increase turbulence and promote more heat exchange. Aside from that, the heat transfer master himself, tube bundles, ranges from brass tube, copper-finned tube to steel tube with an attempt to realize heating and cooling of various working fluids.

Str ucture of Our Shell and Tube He

Tube - sheet is welded to the shell and the heads are bolted to the tube - sheet .

A removable bonnet or cover plate design is provided to facilitate tube cleaning.

Applications of 2 Shell Pass Heat Exchanger Including:

Oil c oolers, Liquid to Liquid or Liquid to Vapor condensers, R e - boilers, G as coolers and more.

ข้อดี

◎ L owest cost among shell and tube heat exchanger

◎ Floating tube - sheet allows for differential thermal expansion between the shell and the tube bundle

◎ The tube bundle can be repaired or replaced without disturbing shell piping.

◎ Shell circuit can be inspected and steam cleaned.

◎ On BEM design, tubes can be serviced without disturbing tube - side piping

ภารกิจของเรา

Except for basic heat exchanger products, Jiema pays high attention to environmental protection filed. In this regard, Jiema ' s unit of waste heat recovery covering wast gas and waste water treatment ha s helped a lot of factories to deal with their biggest headaches which bothered them for years. The efficient equipment helped them even to these days to get cleaner water and fresher air with lower cost and high recognition from the country and government.

☏FAQ of 2 Shell Pass Heat Exchanger

1. How much money would a Shell and Tube He for Juice Heating cost me?

Please call/email us to get a best quote fitting to your application .

2. Why 2 Shell Pass Heat Exchanger but not Plate Heat Exchanger ?

Highly efficient as Plate Heat Exchanger is, it cannot deal with extreme conditions. When the operating temperature exceeds 150℃ or the pressure surpasses 1.6MPa, Shell a nd Tube Heat Exchanger such as Shell and Tube He for Juice Heating is a better choice.